OCZ VX Revisited: DDR Updates on DFI nForce4
by Wesley Fink on March 30, 2005 12:05 AM EST- Posted in
- Memory
Test Results: OCZ EL PC4000 VX Gold
| OCZ EL PC4000 VX Gold (DDR500) - 2x512Mb Double-Bank | |||||||
| CPU Ratio at 2.4GHz | Memory Speed | Memory Timings & Voltage |
Quake3 fps |
Sandra UNBuffered | Sandra Standard Buffered | Super PI 2M places (time in sec) |
Wolfenstein - Radar - Enemy Territory fps |
| 12x200 | 400DDR (Stock V) |
2-3-2-6 2.6V 1T (Stock V) |
567.4 | INT 2852 FLT 3000 |
INT 6128 FLT 6082 |
81 | 119.2 |
| 12x200 | 400DDR | 2-2-2-6 3.0V 1T |
572.8 | INT 2918 FLT 3070 |
INT 6154 FLT 6100 |
80 | 120.2 |
| 11x218 | 436DDR | 2-2-2-6 3.1V 1T |
580.2 | INT 3075 FLT 3250 |
INT 6538 FLT 6465 |
80 | 121.4 |
| 10x240 | 480DDR | 2-2-2-6 3.2V 1T |
600.1 | INT 3230 FLT 3402 |
INT 6804 FLT 6726 |
78 | 123.5 |
| 9x267 | 533DDR | 2-2-2-6 3.5V 1T |
601.5 | INT 3479 FLT 3670 |
INT 7140 FLT 7054 |
77 | 124.8 |
| 10x250 | Rated Speed 500DDR | 2-2-2-6 3.2V 1T |
612.2 | INT 3364 FLT 3557 |
INT 7093 FLT 7009 |
75 | 128.4 |
| 10x267 (2.67 GHz) |
Highest CPU/Mem Performance | 2-2-2-6 3.5V 1T |
645.0 | INT 3465 FLT 3630 |
INT 7552 FLT 7460 |
71 | 135.7 |
The top row of Performance results at 2.6V is included as a performance baseline. While VX cannot achieve 2-2-2 timings at stock voltage at DDR400, it can be coaxed easily into 2-2-2 performance at DDR400 with more voltage. With these modules, we reached an extremely stable DDR400 2-2-2-6 at 3.0V. We then maintained 2-2-2-6 timings all the way to DDR538, which required 3.6V for complete stability. The voltage requirements from 3.0 to 3.6 volts were very linear to Memory Speed.
The important results here are rows 2 to 6, where CPU speed is kept at 2.4GHZ and only the Memory Speed is varied. The performance differences you see in that range are a result of Memory Speed and timings only. In the case of VX, where memory timings also remain constant, the true impact of just memory speed can be clearly seen. It is not a huge difference in real-world benchmarks, but the increase is real nonetheless.
However, speed from 400 to 533 is not the only thing that is important with OCZ VX. Please take a look at VX performance in our later performance comparisons. Look at each of these speeds comparing VX to the best AMD TCCD and other memory that we have tested and you will see something very interesting. VX is faster at every speed than competing memory that we have tested. This means all 2-2-2 is not created equal, as VX is faster at every speed than the competition at 2-2-2.
Facebook
Twitter
RSS
53 Comments
View All Comments
AnnihilatorX - Wednesday, March 30, 2005 - link
This memory rocks. Can someone please do me a favour of buying this memory for me from newegg, ship it to me (UK/HK) and I'll pay him cost + postage + a bit extra via paypal. Thanks very much. It's a bit annoying since you cannot buy this ram from HK. No suppliers.Just e-mail me at annihilator@x-annihilation.com
Thanks again
ozzimark - Wednesday, March 30, 2005 - link
*notes that it's 245mhz at 2.5-2-2-10ozzimark - Wednesday, March 30, 2005 - link
#28my ballistix can go to 245mhz with 2.7v before my memory controller starts hating me and having some serious stability issues. though they seem to scale nicely with voltage, i can't really test it out, because even at 3-4-4-10 with 2T, i can't get over 250mhz.
n yusef - Wednesday, March 30, 2005 - link
AnandTech should do a review of the TwinMOS UTT chips that cost $150 less than the VX. I bought VX before I heard about the TwinMOS stuff, but my friend is doing 2-2-2-6 at 255MHz with 3.4 volts at 1:1. My VX can do 260MHz, but I would give 5MHz RAM/FSB bandwidth and 50MHz core for $150 any day.JoKeRr - Wednesday, March 30, 2005 - link
one more thing, I've heard from many ppl that they're running their BH5 sticks (2x512) to 250 2-2-2-5 with like 3.1 to 3.2V, if u still do have some old BH5, would it be possible to lay a show down between bh5 and VX?? I think I saw a guy on xtremeresouce /or maybe system doing ddr293 with 4V with mushkin BH5 at 2-2-2-5 timing, that's crazy.JoKeRr - Wednesday, March 30, 2005 - link
How does the Ballistix react to voltage?? I've heard that Tccd doesn't react very well, but the old EB stuff could do 2.5-2-2-5 at ddr500 once u give it 3.1V. Could you plz try that and see how the Ballistix scale with voltage plz?? thankQ in advance.JoKeRr - Wednesday, March 30, 2005 - link
Rapsven - Wednesday, March 30, 2005 - link
23-If you are trying to get 2 gigabytes to do those speeds in tandem with the CPU, you'll have problems. Try using the regular 2*512 instead of 4*512 and see you can hit 250 fsb at 2-2-2.
Or ask the OCZ guys, they're very helpful.
ozzimark - Wednesday, March 30, 2005 - link
hmm, my bad, the [img] tags don't work here. just copy and paste that link :)and since it seems that some posts have been deleted, my above comment is in response to #13
ozzimark - Wednesday, March 30, 2005 - link
#14-that's quite interesting. maybe the spd's on the ram sticks are changing important values other than the cas, trcd, trp? i know that there are a lot of values that effect ram performance other than those three. i actually went through most of them on the dfi board, and found that lower isn't always better, similar to tras. though with that you said, i may have to go through and re-tweak my setup with the write benchmark in mind too. i never really gave it much thought assuming that it would scale similarily to read bandwidth.
also, i noticed some inconsistancies at various multipliers. i tested at two speeds, 230mhz (near the limit of my memory controller) at 2.5-2-2-10, and 200mhz at 2-2-2-10. (i use 2x512mb of crucial ballistix)
the only thing changed between runs is the cpu mutliplier. the ram is 1:1, and everything else remains constant.
[img]http://www.freewebs.com/cfeclipse/latency.PNG[/img]